Brodale
Guest
Move vanes to retard position and run with two sets of straight bars on rotor over grates.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Corn coming out of rotor
Hippo
Guest
When you say grates are you refering to concavesIJ If I retard the vanes should I only do the front half over the concave area or the whole thingIJ Also if I retard them and I get into really dry corn (13 to 17%) am I going to increase crackingIJ
Ohio__Steve
Guest
Hippo...can you give us more info on your combine.are you running a standard or spec. rotor.... assuming you have the keystock gates because the disrupters only fit on them.If that is tha case- Specialty rotor and keystock grates then it is a task to get no rotor spillout in dry corn..Mr. Gordan's bars are a good solution
Hippo
Guest
Have a standard rotor and keystock grates.
Ohio__Steve
Guest
Mine is a standard rotor also and I think the notched separation bars on the back of the rotor help.I run a shredder in mine so have not used the disrupters.