rog Guest Aug 21, 2003 #1 yes I have, a local welder did a good job he jacked it up, welded the crack shut, then put heavy angle cross ways,
yes I have, a local welder did a good job he jacked it up, welded the crack shut, then put heavy angle cross ways,
acogoff Guest Aug 25, 2003 #2 I am curious as to where the crack is . inboard of the mounts the combine sits on or whereIJ I crawled under my 6600 and can find nothing wrong.
I am curious as to where the crack is . inboard of the mounts the combine sits on or whereIJ I crawled under my 6600 and can find nothing wrong.
rog Guest Aug 26, 2003 #3 mine is right dead center, mines a sidehill, started from back up behind leveling box
ndfarmne Guest Aug 30, 2003 #4 My combine is cracked just to the inside of the left brake drum. It cracked along the left brace that is welded to the bottom of the axle, then runs up the back of the axle. tj
My combine is cracked just to the inside of the left brake drum. It cracked along the left brace that is welded to the bottom of the axle, then runs up the back of the axle. tj