mudflats
Guest
Had one on an l3 for several years and then moved it over to a 1680. It's been on the 1680 for 2500 hours and have never done a thing to it besides reweld a small bracket.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Crary Chaff Spreader IJIJ are they any goodIJ
Wolffman
Guest
Dakota: I spent less than that on the big spreader fans that "The Spreaderman" sells. Basically you copy the system of a 2366 or 88. I love it, no hydraulics, to windrow straw just remove them. Wolffman
dakotaboy
Guest
Wolfmann, Does "spreaderman" have any posts on here describing how to do itIJ what would I need to doIJ Thanks
Wolffman
Guest
His phone n is 620-465-2324, I think he e-mailed some pics. I made longer hex shafts, so the spinners would set lower. Used mud flaps and conveyor belting to copy a 2388's discharge area. The only thing that took some time was re-doing the pan that's behind the shoe, making it so it would dump the chaff onto the spreaders. I'll give you more specifics if you want to pirsue this. I thought CIH would make a kit for this, but you have to buy it part by part and it gets expensive. Wolffman