Combines CTS2 in canola

[tj]

Are you operating a spike tooth or a rub bar cylinderIJ If a rub bar cylinder, do you have cylinder filler plates installedIJ

 

[Darryl]

This is how I set mine.

 

[gary]

I had terrible trouble last year, cyl. plugups you name it. I could not get the material trough the machine.

 

[Bruno]

Sorry not much help other than to keep it full. Nieghbor had one and just couldn't get the results he

 

[Murr]

I have a CTS and canola is a pain to harvest as well. It's a matter of adjustments and addon's. Maybe try those filler plates for the top_back of the concave. I haven't done mine yet so I can't tell you if they are going to work yet. Canola is a brittle stem crop and the chaffer is always overloaded. I have only been able to go maybe 2 mile an hour at the most. My canola crop is irrigated so the swath is heavier.

 

[Murr]

Well, have installed the back plates on the concave but still overloading the shoe. I guess the fact that the swath is so dry that it really won't matter what a guy add's on. I am going to try combining canola early in the morning, hopefully it will be tougher(damper)

 

[jerome]

CTS 2 in Canola.

 

[Farmboy]

Have you ever heard of "Kamsack Blanks"IJ I have them on my CTS, basically they are 3 sets of covers for the rear of the tine grates. By closing them you send more of the pulverized material out the back end. Some of the performance data that I have seen would indicate that using these should put capacity close to a 9600.

 

[Pierre]

Hi Farmboy, I bought a used CTS last year and am also trying to get better performance in canola. I bought 12 separator blanks from my JD dealer (user's manual recommends 24). I haven't seen a great improvement with these. What's the difference between the Kamsack Blanks and JD blanksIJ Do you have a webpage or phone number where I can get more info on the Kamsack BlanksIJ Thanks.