first of all "slugged" translates "poor feeding" or "bringing it in in wads" fix this first. Then are your bars 1_2 or 3_4IJ Reversing and changing locations will help. While you have the cyl out. HYPERIZE the P3 processor.
Are cylinder bars are 1_2 but since I have talked to a mechanic from another gleaner dealer and he says we need to replace the right-hand side bars with 3_4" bars,and reverse the left side and leave the 1_2" cylinder bars on. As for your hyperizing we have installed the shock kit, removed the sections from the cylinder. Is there anything else we can do to make these a bean eating machineIJ
