j
Guest
I looked at the tractor. I would have considered it on the fair too rough side. It had set out quite a bit in its life. Yeah ebay people go nuts,
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines D 21sold for 13 850 00
Illinois_Gleaner
Guest
I aint a ebay nut and I had the next to last bid on it. That is what they are bring no mater where they are if they are decent and have 3 point and PTO. What I liked about that one was it was 9 serial numbers from the last one built.I ran it from 11150 to 13850 the last 30 minutes IG
Hyper_Harvest_II
Guest
IG, If you are serious about owning a D-21 let me know. Mine is a 1967 model I believe. I will have to get the serial number and look it up again. I purchased this tractor when I worked for Allis Chalmers dealership back in 1984. I used it for Farmer Pulling for 3 years and decided that it wasn't worth traveling all over for a trophy dash. Can be easily set back to stock pump setting. Turbocharger was changed to 7080 turbocharger. Has large fuel injection lines and injection pump has been fine tuned. The cast front weight above front axle has been replaced with plating to remove weight. I do not have this cast piece anymore. I would entertain $13,500.00 and I can get you pictures if interested. Hyper Harvest II
Silver_Shoes
Guest
Illinois, do you still have a link to that auction. I want to show it to a IH buddy.
dairyfarmer
Guest
hey IG i am looking at seeling my 220 if you are interested in it and would consider less than that for it email me if interested dairyfarmer
Illinois_Gleaner
Guest
http:__cgi.ebay.com_ws_eBayISAPI.dllIJViewItemanditem=7605003989andrd=1andsspagename=STRK%3AMEWA%3AITandrd=1 That is the link,if that dont work send me your email and I can email it to you . ilgleaner at yahoo.com
Illinois_Gleaner
Guest
The 220 will bring about 1_2 to 2_3rds of a D21. What are you asking for yoursIJ Are you guys wet down thereIJ We are floating here and got another 2 inchs today IG
Illinois_Gleaner
Guest
Hyper , First off the reason I went that high on that tractor is that it was serial n 4600 . The last one made was 4609. 3ptIJ ptoIJ chrome grillIJ Where would you ever find the front weight for oneIJ How much would it take to put the stock pump and lines back on itIJ What size tires on itIJ I am looking for one for my dad,he wants one original.I would like to see pics.Do you have the fender skirts for itIJThat tractor I bid on wasnt far from me also helped,with the price of fuel these days. Where are you locatedIJ Thanks, IG
Silver_Shoes
Guest
Thanks gleaner, its time to gloat lol
Hyper_Harvest_II
Guest
IG, The serial number on my D-21 is 3581(Series II Diesel)I have the operators manual and service manual that would go with it. It has three point,chrome grill ,fender skirts and as far as the front casting goes you can always add front end weights. The system that I made to replace the cast weight (1000 lbs.) looks factory. The injection pump can be turned back down to factory setting and the injection lines will not have to be replaced. I just need to put a set of stock injection nozzle tips back in injectors. Factory seat was in very poor shape so it was replaced with bucket style seat. This can be changed back to factory original. The tire size on the rear is 20.8-38 radials. I am located in southeast Iowa.(30 miles south of Iowa City,Iowa). It is time to get get her fired up again after sitting in shed all winter. I will try and get you some pictures. I have entertained the thought of trying E-bay but haven't had the time. Hyper Harvest II