9880sts
Guest
it helps a lot in barley and wet high yield weat. it will reduce your tailings what also hekps you to reduce walker losses. Install the de-awning bar and open your de-awning blades and you will have at least 15% more troughput. you also can turn arround your walker Back bearings what givs you more capacity on the walker becouse by turning the bearings you gonna lift your walker about 2 cm up. yu also should check your your secound concave if its in the right adjustment.Machines from 2003 and 2002 hat to much clearance in the minus position almoust 20mm to much.than you can drill one more hole on the lever to close it more.the distance between the minus hole and the new hole should be around 5-8mm max. if you dont have a flight extensions on your headerauger you also should install them.check your sproket on the feederouse on the drive side it should be a 26 tooth sproket.2002 models hat a 22 on. if you need more info just give a e-mail. Greetings 9880