Hyper_Harvest
Guest
JR, Glad to hear of your success.Hats off to you for your patience and to everyone for their good comments.Hi-prrrrrr-for-max has always been a team effort. Good luck with harvest! Hyper
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines dialed in
tbran
Guest
For those interested the sheave n is 71366755. It should now be 15% faster. I would ONlY run it in high yielding corn, then switch it back. We did some calculations and the old gal is spittin' out close to 70-80 bu _min with 12 row head in GOOD corn.
NDDan
Guest
Is that the slip clutch pulley and did you need to move idler pulleyIJ Hyper had said once that clean grain speed was going to have to be increased on even the latest machines when bringing these machines to potential. I guess they were right when head is big enough and yeild is great (I'm not surprised). Great work guys.
j72
Guest
yes, i had to make a bracket out of 2" channel and welded it next to the existing one and moved the idler up 2" andto the right 2". left the old one there so i could move it back.