Combines Elephant Ears on 1660

[SDman]

Butch, you sure can. Take the rectangle-shaped cover off underneath the cab held in place by 2 half-turn clips. Clean out the 50 pounds of dust, dirt, chaff, grain, and and everything else imagineable you will find behind the cover. Next, you will see a half-moon cover that covers the elephant ear area at the front of the rotor. Take the bolts out that hold this cover on. Now you will be right where you need to work. Oh yeah, it also works a little easier if you lower the feeder down all the way to the ground as you can use the feeder house for a ladder. Good luck!

 

[eyeball]

BUTCH if you are changing your elephant ears it maybe worth getting more info on the MARlINS IMPEllER BlADE kit for your combine.I have heard that they work very well.they are sold by westward products inc. in the usa or westward parts in canada.