Combines engine removal 750 combine

remove the four bolts on the flange and the motor mount bolts. you will also have to remove the brace in front of the water pump in order to slide the engine away from the flange and shaft. It takes a loader with a lot of reach to get the engine out I use a backhoe and swing it out with that. not a bad job to get out. the cylinder adjustment shaft has to be moved out of way and the fuel lines need to be unhooked. you might find it easier to pull the fan asembly out so you have some room to work. bearings probably need to be replaced on it anyway.

Thanks for the info. Glad to hear that those four bolts are all that is holding that tube on the back. I am going to use the engine in another project and scrap the rest. I am going to use the radiator and hydraulic pump as well. Know anyone needing any partsIJ Thanks again for the help. YC

looking for a good grain pan if you got one and aren't too far away for Ohio....