Combines F s and F2

I assume you have no auto heaight controlIJ If not I can't imagine cutting beans w_o one. Almost any salvage yard will have a F,G, pre 82F2, K, K2 with a 'Genie' auto system on it. You will have to have the plumbing or make up hoses, the 4 way header valve, a cable, the feeler bar for a rigid header and clips that hold it on, and of course the 'genie' valve that fastens outside the window along with the flow control valve. You also have to have helper springs on the lift cyls. The system works really well for its day and time. The big item is make sure the header is level. On the floating cutter bar - Hart Carter- it gets a little more complicated as all the linkages are pretty worn by now. They worked well again for the time . Most mfgs in the 70's used HC system.

we have put several electric controlls on f-f2 combines in the past. used headervalve (off early l-M or l2-M2 before single valve stack)bolts on existing valve and voalla you ether install 3 position or older 2 position in cab and you are ready with something that works. we also use hydro handle for switch if possible on hydro models.

buckeyegleaner.. pleas email me directly. i have several questions about your improved setup. thank you Jim jmhuz3@hotmail.com

buckeyegleaner.. pleas email me directly. i have several questions about your improved setup. thank you Jim jmhuz3@hotmail.com