Combines F2 bars in R62

The concave bars would not be strong enough with out a lot of extra bolts. I used an old n 5 bar. I just had to cut it so it would sit flat and then bolt it to the front ( towards the cab ) of the sep. concave. Make sure the cylinder can not hit it if you need to tighten up the concave. Good luck

The F2 bars used in mods are the concave bars not the cylinder bars.

John F, If you're interested in getting rid of those bars if you can't use them, shoot me an email. -nospam-jstewart@mecoengineering.com remove-nospam-