Combines F2 bin auger chain

[tbran]

The problem is your auger that takes the corn away from the chain is worn. Thus the corn goes up, piles up when the bin exceeds the level of the tube, and then goes back down the other side joining the flow from the shoe and the result is overloading of the clean grain system and the clutch slips. Shiming the clutch or speeding it up will not help until the top flighting is replaced. 71145334 is the part n of the auger IF you have the hyd fold auger. Be careful there are 3 bin augers to choose from, std, bucket and overbin.

 

[Gpurrs]

I had similar problem on my G. The roll pin broke between the sprocket and the auger shaft.There was enough drag to turn the auger till it got covered with corn,then it would stop.Im not sure if a F is made the same,but it might be something to check.

 

[Illinois_Gleaner]

Are you going to start visiting the other page nowIJ I got 2_3 s of my money back today.Have you started up there yetIJWhat size of Red one would replace the R62IJ He still sayed yesterday he was going to get it all done and get Massey and white from out west. later, IG

 

[Gpurrs]

I have been checking the red page for a couple weeks.Ive got a lot to learn.I start monday.Not sure what Im getting into,those 8010 sure catch hell.They said they only have one out.Im sure they will get the bugs worked out.From what Ive heard,R62 would be between a 66 and a 88.Hope everything works out for them and you too.

 

[kooch]

Yes there is a speed up sprocket for your clean grain elevator on the F2. If you or anyone would be interested I have one on hand that I will sell for 50% of new plus postage. This sprocket is virtually brand new. E-mail me if interested