Combines F2 Head drive problem

There is the fuse, switch, wires, brush holder and magnet to check. Howeveer it has shown up that the armature plate bearing gets loose on the hub and lets the armature wobble which breaks the straps on the armature. To get going fast simply remove the magnent, and insert 4 3_8 X 4 " bolts through the outter hub and thread them into the inner hub. This bolts the unit up solid. I may not have the bolt size correct but I hope you get the idea.

I will make sure to check all of the above mentioned goodies. That is great that I don't have to pull the exsisting unit off to get the beans done. At least I can get some time later to fix it correctly. Thanks tbran.