tbran
Guest
First are your header springs pushed up tightIJ If not your hyd oil may get hot and not let hyd work right..If your oil has been hot make sure all suction hoses are good, not sucking air and not collapsing. Secondly is your pump belt tightIJ Third your flow divider spool may be stuck. Thats the spool under the BIG screwdiver plug under the port plate which is the inside block of your valve stack. get a BIG screw driver or chisel and loosen the plug and be careful to pull everything out slowly and don't drop anything or you will be scratchin your head and visitin you neighbor to bribe him to let you see how his goes...been there, done that, got the t shirt...the spool should be the last thing that slips out. If it don't you probably found the problem. Pull it out - the spool- polish it and reinstall. Fourth, assuming you havn't found the problem, which if you have- quit working on it - duh.. check the pressure releif valve. If your dealer is real nice he will let you charge one and not charge restocking fee when you bring it back cause you probably gonna need, fifthly -A NEW PUMP!