Combines Fan speed

[likesmxbutdrives8420]

oh yeah we are running a 2188

 

[farmert]

are your pulleys wornIJ 6 sided belt not tight enoughIJ something is slipping if you ahve it adjusted to max speed my .02

 

[CAJUN__BOY]

was curious ran ours up to 1270rpm's under load, we usually run fan around 1140 in rice an 1200 in beans, just a thought check engine speed then triple belt tension oh yeh!! check throw-out brg on end of fan shaft thats what ajust the pully that's my guess!!

 

[Unit_2]

Yep, CAJUN BOY is right. That bearing is bad. It just looks like a throw-out bearing, it is actually called a thrust bearing.

 

[jacco]

also replace the bushings in the adjustment braces when disassembling. a little wear goes along way on the the fan speed.

 

[farmertim]

look at your top pulley and see if there is any more room for adjustment. If so tighten sheaves manually. Thats what I did anyway!!!