I have heard of guys taking the rubber paddles completely off the cross auger, and having no problem with feeding the ears into the feederhouse. Dont know if that is what your problem is but is maybe worth a try. 99-9410
Are you sure it is your feeder house IJ I would try opening the cylinder up a little. You might have it too tight and some of the ears are going around the feeder house chain and are being thrown out in front as the chain comes around. Hope this helps. lucky luke
1..check feeder chain is in float position 2..check concave setting 3 check table auger position have u got a hood over the centre of the corn head does it stop if u slow down ur ground speed hope it helps