AlanE
Guest
Try shoup at www.shoupparts.com
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines feather sheets for flex head
Seen_the_Green_light
Guest
You can make your own a couple of years ago we had a 20' series 3 flex head for a l3 checked with AGCO thought they wanted to much for them so we live near a Hutterite Colony that does a lot of machine work just had them get a 5 x 10 sheet of Stainless Steel check your header for proper guage and had them cut them and put a small bend on the one end, looked just like boughten ones for about 25% of the cost plus they were Stainless Steel only thing we had to do was drill the hole in the correct places for bolts not to difficult to do considering the money we saved and question e-mail me!!!!!!!
RD
Guest
Shoup has them for around $300 for a 20 ft. in stainless.