Redhotnrolli_n
Guest
dink; Do the paddles of the rocktrap rotor have vanes that can be adjusted on slots in and outIJ If so, slide them all the way in toward the center of the rocktrap rotor. Also, the rocktrap may be turning too slow, or too fast causing a bottleneck in the feeder. There are different size sprockets available to correct this. I use a trap on a 1660 with no trouble. The gearing appears to be 1 to 1 with the feeder. The neighbor put one on a 1460, and cussed it the first time out to the field 'til he got the correct sprocket setup, then it was fine.