tbran Guest Oct 16, 2001 #1 Is your chain on slow speedIJ If so go to high speed. Works for us. Sometimes back stops can be lowered to grain position to help be more aggressive.
Is your chain on slow speedIJ If so go to high speed. Works for us. Sometimes back stops can be lowered to grain position to help be more aggressive.
sdfarmer15 Guest Oct 16, 2001 #2 I will try it.The combine that I have doesn't have a floor in between the chain does this matterIJ Thanks for the help.
I will try it.The combine that I have doesn't have a floor in between the chain does this matterIJ Thanks for the help.
Dan Guest Oct 16, 2001 #3 What year and modelIJ If it is a R40,50 you may need to fill in area between sprockets and the square tube. The sprockets should just clear by tube by about 1_4". We weld in a 2x4" piece of metal tubing.
What year and modelIJ If it is a R40,50 you may need to fill in area between sprockets and the square tube. The sprockets should just clear by tube by about 1_4". We weld in a 2x4" piece of metal tubing.