STATIC_84
Guest
To "ohm" out the pots, use ohm meter, first unhook the tracker connector at the combine. take ohm reading between two of the pins now a second person lifts the corresponding divider all the way up, take your reading. Now switch to other two pins for the other side, repeat procedure,take readings. If the two sets of readings do not come close to each other, the pots on each side can be rotated, then recheck ohm readings. When you get them within approx. 100 ohms of each other, the field tracker should work like a dream, or I should say, it wont tilt to one side when turning on the ends.