Combines Fieldstar Problem

Junior, Have you changed anything in these different loads. When I had my Agleader if you changed a big difference in moisture, test weight, speed travelled (flow) etc. from what is was when calibrated you lose accuracy. Proper calibration was very important! I am sure the Fieldstar will be the same although I have not had an opportunity yet to check it out in these different situations. If this is not the problem I would suggest your dealer should be able to help you. Dave

If you have the fingers hanging down from access lid you need to see if crop is getting up into box preventing proper load bar movement. If you have pad with loadbar coming from the rear you need to see there is clearance for it to flex and no plugging is taking place. There was Fieldstar bullitons on both. Best check with your dealer on those. Good luck