SD_455
Guest
Better stick with a series 2 head. The 300 series have a hydraulic pump on the head to run the reel and need hydraulic solenoids to run the header control right. You can adapt an F to run a 300 series head but you would be better off getting an F3. To use on an F you would need to plumb in an up and an down solenoid to use with the header control and an switch to speed up or slow down the reel. If you could find a used header control kit called Big Shaver it would work with the 300 series head as this kit is basicly what was used on the 3 series combines. This is the kit I have on a F2.