Combines Fuse panel 1480

[weap]

Polarbear, your operators manual has the electrical diagrams and show the fuse position and size I believe it is around page 91. I have a 915 which I removed all the fuses, modified the fuse holder and use bolt in circuit breakers. These are avaiable at any auto supply. With the circuit breakers if there is a problem they will kick off and reset after they cool down. Also with them bolted in you remove the poor connection of the exiting fuses to fuse holder. Weapon

 

[Torque]

Pull the fuses and clean the holder off, it is marked for amperage. If you want the spade fuses go to your Case dealer and buy the fuse holders for the 16 series (it takes 2) and the terminals. This is cheap and easy and is a great improvement.