ACMAN Guest May 23, 2004 #1 I have an A2 the threads on the nut and housing was worn letting nut slip when engaging clutch. This may be worth taking apart to look at.
I have an A2 the threads on the nut and housing was worn letting nut slip when engaging clutch. This may be worth taking apart to look at.
SD_455 Guest May 23, 2004 #2 Take the clutch apart and clean it up. You can check the clutch disc for wear at this point. I had one on a F2 that had enough packed dust in it that it made it hard to adjust. After cleaning it worked like new.
Take the clutch apart and clean it up. You can check the clutch disc for wear at this point. I had one on a F2 that had enough packed dust in it that it made it hard to adjust. After cleaning it worked like new.
bluestem Guest May 24, 2004 #3 Thanks for the pointer I will check that out. I appriciate it. Bluestem
bluestem Guest May 24, 2004 #4 Thanks I appriciate the help. This one is not the cleanest I do think I will tear into it and clean it. Bluestem
Thanks I appriciate the help. This one is not the cleanest I do think I will tear into it and clean it. Bluestem