Combines grain bin floor

[OKFarmer]

Don't know about AGCO, but check out www.polyskid.com. They make the poly bin floor replacements. They will last much longer and clean out easier. OKFarmer

 

[NDDan]

I'd have them check the 65-75 part manual for the floor n.

 

[des]

Thanks NDDan. I do appreciate the help. OKFarmer I checked polyskids website and didn't find anything for gleaner but it shouldn't be too hard to make. Just need a sheet of poly. Thanks. des.

 

[OKFarmer]

Hey DES, If you will call Jimmy at Polyskid he will fix you up. Tell him Brian from Oklahoma sent you. We are trying their moldboard covers this year. They are working great!!!! OKFarmer

 

[kooch]

Did this on a F2. Works great. Take the auger out amd pop rivit a sheet of high wear poly to extend no more than 12 inches up the sloping sides. Taper the edges with a side grinder (Taper edges before installing) so grain doesn't get hung up on the edges. Did this 5 years ago and no wear on poly. Works best to do this when it is warm as the poly flexes better to install. Good luck

 

[husker_gleaner]

Where did you get the poly sheet. Thanks

 

[kooch]

Egbers Farms, Uehling NE 1-800-462-2588 Also one of the best sources for high wear auger flighting. Every size and diameter in stock imaginable.

 

[brent_56]

We used steel in ours worked well just ran the sheet about 10 inches up on both sides of the auger. I would think Poly would work very well as well.