Combines Header Height problem on 2388 AFS Yield Monitor

Thats weird since that monitor only is set up for one height and one head The only way to do what your asking is to take it to a dealer and let them update the monitor The newest version is 5.0 whats yoursIJ Also the differences are you don't have to program your temperature.. The main bar is moved from the bottom to top. on your harvest 1 page you can put alot more options on it.....even your farm-field-load and change everything from just 1 page threwout the whole day you never go to any other pages unless you brighten or dim the monitor just giving you some ideas

I had one of the sensors on the feeder house go bad and I had the same problem, I replaced the sensor and all is good now. I believe it was around $100....

I remember seeing the version number and it starts with a 5. I took the arm off of the sensor this AM and the sensor moves smoothly. I thought maybe I had done something wrong in the programming of the height. Tried it again today and it still does the same thing. I'll have to call the dealer (65 miles away) maybe they'll give me a new sensor to try. It is still on warranty. I have most of moisture, acres, header width and manual stop calculating all on page one. Also have farms, fields and loads all set up. Works fine otherwise. Thanks for the help.

Alright.. Ive had really good luck with that new software as well and like some of the features I would have them (if they don't know what to do) reinstall the software..... that will delete calibration loads..... and everything else.... let me know what you get figured out thats kinda odd