NDDan
Guest
Where's the slug coming from and what head do you runIJ
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines header troubles
Gleamer
Guest
We talked to our dealer about the same issue on our 3-16. He mentioned the auger needs to be away from the back rails 3_8" and the same from the pan, we set ours at 1_2 and seems to work fine. Make sure your reel fingers are in place on the ends and deliver material to the auger, our only slugs would come from broken or bent reel tines not there to do the work needed. It is a matter of cutting and feeding evenly. Good luck
Gleamer
Guest
We talked to our dealer about the same issue on our 3-16. He mentioned the auger needs to be away from the back rails 3_8" and the same from the pan, we set ours at 1_2 and seems to work fine. Make sure your reel fingers are in place on the ends and deliver material to the auger, our only slugs would come from broken or bent reel tines not there to do the work needed. It is a matter of cutting and feeding evenly. Good luck