Combines Helicals in the R40 Cage

[tbran]

yes they can be made or purchased to install there. Need to be in. Post back if your dealer can't find n's. As to your grate, we have them welded up back to level and then hard surfaced and lightly ground back down. About a hundred bucks. We have on two occasions made high wire out of low wire by taking the rods removed and welding them on top of the rods that are left. Not a bad job if the grate is out. TAKE A GOOD lOOK AT THE HElICAlS! Replace them if in doubt. Also add the helical extention to the top lh feederhouse opening.

 

[Deadeye]

I think what you want is called the edibe bean kit, in the parts book. I used ends of helical bars that I replaced (cut out the good ends). Also if your helicals are wore you can have problems all of the way back to the head because the straw will not be pushed through the cyl. fast enough.