Combines Help Calibrating MacDon on an STS

Make sure your platform is level and down on the ground all the way. This might work or it might not!

in the dignostics under EO1 address 22 is lH sensor and 26 is RH voltage must be between .5 and4.5 to cal. when on the ground. also there os three wires that hook together as a identifier at the plug were the header plugs in. just setthe header down and check those adresses for the proper voltage and adjust to the range if that dont work check the idetifier wires there is diff setttings for a 1,2 ,or 3 sensor system

where could i check how many sensors the combine is set forIJ assuming that it has last had a 3 sensor system on it, and now has 1 sensor. thanks

The idetifier wires are on the plug on the header by simply changing positions it tells the computer what sensor setup it is just have to look at jd header that has one sensor and see what 3 pins its in.