Combines Help me TBRAN please

Well I don't have good news. You need a 71131341v shaft,2-71118304 brgs, 71116581 brg, 71145588 hub, 3-71145587 studs, 70923664 oring, 70926620 backup 70923813 oring. little less than $400. Remove input shaft and rebuild. 4 to 6 hours. The input shaft is the same as F's and K's. The hub is the same up to the F2's. If one could find an assy the shaft and hub are common, the housing and sheaves are unique to the K-K2 Just make sure the hub fits the shaft snugly.

Thanks for the reply Tim, I got the hub ordered, the o-rings, the bearing for the spring housing and I dropped off the old hub and cannister at my somewhat local Gleaner dealer (1 hour drive). They are going to renew that part and the input shaft and bearings are good yet, It still will be a pricey fix though. I am thankful parts are availiable for the old girl and I just want it to last as a main machine for one more year until I can upsize to an M or l size machine. Were there any K2 hydros builtIJ