Combines Hump in 930

[mit9750]

ya may just have to adjust it to make it level again. if ya ran over a rock you should have noticed it. and maybe, your jam nuts worked loose and thats why its out of wack. worse comes to worse, drop the skid plate down and compare the very ft. piece(can't think of the name of it)to a new one. they bend and throw stuff out of wack too. good luck

 

[bh]

As mit9750 said those braces don't have to be bent much to make a bow in the cutterbar. You can also have a bend in the long plate the width of the header that the cutter bar is mounted to. It's like made out of some sort of spring steel. I have straightened mine by bending it back down and also by adjusting the cutterbar tilt. Problem with using the cutterbar tilt adjustment is it runs our pretty quick. I would first check the cutterbar support braces, those things aren'e built all that well. We generally replace several broken ones a year. BH