Combines Hyper need input

We have mostly wheat with some corn, edible beans, some soybeans, sunflowers, canola, ect. When replacing concaves we go with hi-wide wire and make bottom mount filler bars. We've installed lots of steep pitch helical kits and add a couple when we do it. We get by good with standard pitch also as long is third one from gearbox is extended over top left corner of feeder opening. We don't like using any reverse bars and would suggest to only have one spining in any one location if using them. We don't like seperator grates so we have did several things to smooth it out. We have installed cover kits made of cage material. We have cut it out and bolted in cage material door made by loewen. We have removed every other wire and plugged exposed holes and then cut short pieces of removed wires to tack weld onto wires still installed. For your newer machine with adjustable grate we had loewen make us a new section made of cage material that will bolt right in after removing currant one. Hyper has been leaving all wires in and then cutting and sliding back every other cross bar. Extend every other cylinder bar to discharge and then full length on the rest (loewen has these). We stay with OEM chains (not sure there are any jobbers with that aggresive of slat)

G'Day Dan Can you tell me if I wanted to order a New R series Combine, Could I actually ask for the exact set up from the factoryIJ like all forward rasp bars, 1_2 inch on thrasher side 3_4 on sep sideIJ Can you order with all bars extendedIJ can you get the machine for small grains with out strippers in front of feeders sprocketsIJ Can you get them order with Steep pitched helical kitIJ can you get the Sep Cage kit in stead of the sep grateIJ Basically can you order a Combine that is very close to a Hyperized MachineIJ Would love to know if there are any Part numbers for a factory Hyperized combine if that's possible!!!!!! Rolf

Not exact from factory. You can get with two reverse bars. You can get with narraw rasp on thresher and wide rasp on seperator. 2001 machines were standard with extended bars. I don't believe any machines come with front feed strippers since the false floor for the most part prevented cobs from getting between chain and sprockets. Rear feed stripper would come with version of machine that is speced out for corn. Can't order machine with steep pitch helicals or seperator grate cover but can order factory equiped with hi wide wire seperator grate. Basically we take todays factory machine and install third helical extention and remove reverse bars. Machine will work fine like this but of course some more fine tuning here and there will help out depending on what crops they will be harvesting. Who knows what the next Gleaner will have but we keep giving them our $.02

did you get my E mail Dan

Yes I did and thanks. Wish I could take the winter off for I would come help you build an animal.