Combines Hyper Priorities

If in soft winter wheat the reverse bars are the most power robbing. leave 4 blanks in row 3 and 2 in row 4 of bars adding the disrupters on the holes where stars attatch to bars. But you must add F2 bar_bars on the sep. side to keep rotor losses from going skyhigh. Next I would rate pulling everyother wire on concave and sep. side. Then extend paddles. But if cylinder is out do it all. All this is a day's or less work if you can weld.

This will not lower power consumption. I tried it in beans and it did not take any less power. My theory is that there was nothing to push the crop against the helicals and so it slowed flow.