Combines HyperizeIJ

Hi'-per-ize : of the old latin word meaning "run like a scalded dawg across what ever lies in front of one faster than any like object has ever transversed before while maintaining a better than acceptable format of modus-operati".. In other words to take a pretty darn good Gleaner and via a few modifications, turn it into a smoooother, more efficient harvesting machine. To see a pictorial directory look to your left, no not that far, just over to the TIPS retangular box, click on it, then click on upgrades then let your mouse do the walking through the various means of 'hyper' upgrades that adress whatever your area of interest might be

And a word of caution: make sure your augers, dryer, and hauling can handle more grain per hour. Tom in MN

To answer your question, in this forum to Hyperize means to fine tune your combine with upgrades that are the results of many years of trial and error.

the idea is to 1 thresh 99% at the high wire grate. Then 2 get the material other than grain, MOG, the heck out of Dodge. let me restate that in the venacular of international rendition. After threshing we want the material out of the cyl as quick as possible in as thin a mat as possible with out balling or roping ( a function performed unfortunately by reverse bars). Balling or roping of MOG tears the straw apart and as a result dumps it on the lH side of the shoe. The wires in the bottom whether 1_2 " 3_4" or 1" spacing (you do the monkeymeter conversion)have little to do with shoe load if one has the cut paddle_extended bar combo, and no reverse barfs. For some reason the stationary retarders seem to take less hp and tear up the crop less than revbars. Try it. One can always put em back in. Keep an eye and ear open for the mini-shreader kit on the test circuit which could be the next generation low cost upgrade. This is a knife set that barely inserts into the cage which breaks_slices_dices ( I feel like RonPopeel-Ronco) the balls_wads and releases the wound up grain and lessens the HP_increases capacity. I have high hopes for this, but then again I thought I could win over my MIl too... time will tell, stay tuned.