Combines IJ on rear conveyor upgrades

front drum guides are available from you agco dealer, you will need to know the diameter of your drum, there were several different sizes...

You can get factory feeder drums for P3 systems in 7", 8", and 8.625". I have installed a smaller rear feed drum in some P1's and I went with 7" instead of the factory 8". I had a machine shop make them for me and they used the same thickness as the old one. They used the single guide rings like original for the W-rings were not available when I had the last ones built. The numbers for W-ring kits can be found in the Gleaner service bullitons. Gleaner and loewen have shock kits for the R42,52,62,and72. I made up my own kits for early N's and R's. loewen now has the kits for R40,50 and is working on the kits for the other machines. I'll check with loewen tomorrow. Catch you later.

I guess I forgot to mention my combine is a n5.

loewen was down today to finalize front shock plans for older machines. I'll will know tomorrow how soon I can get them. let me know how soon you want them and if nothing else I will make up a kit for you. They will run you about $100 for front and the same for rear. I would consider the rear the most important. Catch you later.