j
Guest
I ran a 820 on my 89 R40 and it worked great.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines IJIJ 800 Series Head on an R40IJIJ
T__langan
Guest
If your combine has the reel drive system on it (as opposed to on the head),you can run the 800's. You may also have to convert the header height control back to the old style with the 3 springs. I'm not positive on this, but I think the 800's all came with the new header height system on them. It's not difficult or all that expensive to switch them back - we had to on our 815. Tom langan
strawwalker
Guest
I think I kept the switches _ wiring harness etc. when I converted my 500 series to the newer AHHC with the potentiometers. let me know if you want it. You can have it for free just have to pay the shipping from Ontario.
rforro
Guest
Strawwalker can you give me a ballpark price on converting over. I would also like to go to the poteimeter. How do you like itIJ
kw
Guest
If he isn't interested, I may be. Is this the 3 spring set up like on the 300 heads that you have. let me know if the other guy takes you up on it or not. thanks, Kirk kbwelton@adiis.net
strawwalker
Guest
yes it was the same setup as on the 300 series heads.... send me an email and I'll get back to you if he doesn't need it. softtail_00@hotmail.com
strawwalker
Guest
is your combine setup for the potentiometers IJ I ony had to convert the header over..wasn't that big of a job...it's been a couple of years but I think the kit for the header was about $250 USD. It came with everything including instructions.
rforro
Guest
no it does not