Combines In Cab Sieve Adjustment

Just one question I have for anyone who ever had one of these options, Who gets to clean the seives out before you can close them from the cabIJ just wondering since mine inevitably get jammed up with some cob chunks and these will not fall out when you open the seives up, either. GS

I've been thinking (dangerous) about this also. You could use the electric fan speed threaded rod to connect to an external sieve rod. A revolution counter would tell how many turns of the threaded rod and give a reading for the sieves.

that's what I've always wondered. Brad NC. IN.

Climb dowm the ladder to check the sieves, then have to climb back up to open the sievesIJTwo trips up and down the ladder to adjust and clean the sieves, why bother.One trip down the ladder to manually adjust and clean shoes seems more logical. But an in cab adjustment of the concaves would be nice.

Just seems like most ppl are getting so lazy anymore. Why would you need that optionIJ Sure its nice to have..but when it quits working for some silly reason then whatIJ. And we wonder why prices are out of reach for new equipment.

A canadian firm Wiebe in Saskatoon, Saskatchewan makes in cab combine sieve monitor and control. Features: Preset 6 different crop setting. Fine tune sieve opening on the go. More accurate than manual setting. Accrate to within 1 mm. Auto sieve clean button allows operator to clean sieve at the push of a button. Tel: 306 683-0330, Fax: 306 668-5552 Hope that it will help you

I would spent my money on the AirJet Chaffer and you will not have to close the sieve again. Been there...done that....Jack