Combines Jd 9000 hyd pump calved

Had the exact same thing happen, we had just got it (1993, 9600) and one morning I started it and went to lift the table, and had a whole lot of oil, all over. It turns out the pressure relief valve (located on the solenoid valves) was turned too high. But about $800.00 later it was fixed.

last fall while harvesting soys i had the same thing hapen only it was just a small crack and i didnt get a oil bath but i put a reman pump on and now it is fine

Had the seal fail on a 9610 and filled the hydrostat up