Mutsky
Guest
I was runnning this fall with two 9600s that experienced a similar problem...If your problems are not air filter or injector pump related, lack of power under load is almost always caused by fuel flow problems. As I understand 9600's ( I run an 8820 T-II ),there is a strainer in the bottom of the tank right in line with the fuel line connection. You may want to check this to ensure it is clean and not restricting fuel flow....( best to do with as near an empty tank as possible ) ... The second place is your fuel filters....How long has it been since you replaced themIJ Elaborating on what you have done to check the fuel flow would help us understand better.