PETE
Guest
Congrats on your purchase. Four years ago I bought a 80' N6 in a similar condition. click on TIPS, then Gleaner Upgrades and open the top box for the P1 processor. I would strongly recomend that you upgrade your rotor with the info contained there. I did that three years ago (except for the grate) and I can't say enough about the increased capacity and excellent grain sample. I also had the pump recalibrated to put out 220 hp at N5 rpms to reduce the stress on the motor. Make sure you separate the first six row of the chaffer and run them with a separate control rod for increased capacity. Good luck you got a tiger by the tail, with a little modification you can easily out perform the $100,000+ machines. Pete Hinrichsen