Combines K2 and F2 grain head interchangeabilityIJ

[tbran]

IF you are handy with the torch and welder it COUlD be done. Top hooks moved, throat cut out and rewelded wider on each side, bottom hooks welded in to match, drive shaft cut off 1', auger flight cut back to miss feeder beater. I had rather buy a F2 header and rework it.

 

[zippy]

I changed a K2 head into an f2 I found an old junk f2 head took the complete bracket off of both heads and put the F2 on the K2 then cut the sheet metal and the shaft to fit.