Combines K2 in soybeans

[tbran]

hmmm, first check your cyl. bars for wear. If they are rounded, reverse them if possible. Not much cure for worn out bars. 2nd, close down the cyl. 3_8 to 7_16 -1_2 max will increase your capacity. You are backfeeding the cyl. That is the lighternotsounds. In rare incidences such as yours seems to be, remove All concaves, leaving the square bolts in. If you cannot shell beans out of pods now, put in a half round on the door. I have never ran a cyl that slow in beans - 20" pulley, with the bars out you should be up to about max speed on the 20". Most use 13" or 16". Oh, and make sure cyl is level. As to your 750 choking, the hymelic (spIJ) manuver is all I can reccommend.................

 

[ewbeye]

Purchase a set of aggressive cylinder bars if your current bars are worn out. They do an excellent job of increasing the k2's capacity, beside eating weedy spots better. One note, if you push the capacity, you may want to remove rear beater. The one just behind the raddle and above the front of the straw walkers. This seems to be a bottle neck with weeds or green stemed beans.