Our monitor lights never have functioned right. We're used to not having them so we just go without. Alot of times though, they just need adjusted, which is real easy. Make the dealer fix it up before you buy!
Have you ever had trouble with the electric over hydraulic systemIJ Where would I begin to look in order to solve the problem of the auger starting when attempting to fold it backIJ Thanks
Sounds like someone has wires turned around on auger swing coil or wires to it. As a safty measure Gleaner has wired to turn off unloader if someone goes to swing auger in without disengaging unloader. Doubt it is anything to serious. See if unloader works normal otherwise ect. Monitors are easy to keep working as long as no one leaves it go to long. Big plus would be to keep rodents out.
Yeah, I think the other guys comment about rodent control would help. Start checking wire connections in fuse panel. Then check out wiring on solenoids. ...'ya know..the newer l-2's had a switch on the overhead console that you could set to automatically swing the auger out when the bin was full. I wonder if something is switched around with thatIJ!IJ!IJ Hope this helps!