Combines l2 Vs M

[brent_56]

The corn head should work on the l2 and the m but there is a difference in feeder house widths so you will need to adapt it over which i dont have any experience with but most of the black gleaner corn heads are l_M which means they will work on both. We currently are running a Black 6 row on a 76 M gleaner and im shure you can put it on your l2 but with a little adapting. As to the engine there are 2 sizes of motors put in the gleaner combines so you would need to make shure that they are the same series as your tractorbecause we also have a 7080, and a 7020 and the small engine in the gleaner is the same as the allis tractors so i think you would be alright if you made shure it was the right series! Good luck and thanks for your post!

 

[John]

The heads will interchange by changing the latch widths on the l_M or A series heads. The M series runs the 2900_649 Turbo and_or Intercooled. The 7000_7010 uses the 2900_649 turbo, the 7020 uses the 649 Intercooled and the rest of the 70 series AC's use the 3500_3700_670 series engines. Front plate, oil pan and the location of the dip stick are the only changes between the M Gleaner and an AC 7000 if it is the non-intercooled M engine.