Combines l3 Header Creeps down

[tbran]

don't know what happened to my earlier reply as post is gone but try this-- first replace n's 71367795 from r62 in stead of 70923845 these are square cut o rings . Then replace 71321101and lap the poppet tip to the seat with comet or FINE lapping compound and do it lightly repeat lightly. Finally do the same with the plastic poppet or replace it - 1054100m2. lesss than 2% chance your valve is cracked which is only reason to replace. see your dealer or parts book for picture of what I'm talking about. If you take the valve off remove the screw driver plugs on each end and blow the valve out good. alittle piece of wire off a hose can cause havock..

 

[Dan]

Don't forget that needle and seat and the oring for the seat may be wore and leaking. That is the needle and seat under the lower solinoid. Good luck. Dan