tbran
Guest
change to compatable hyd hook ups for reel lift. Combine may have to have header reel speed switch installed if your reel speed is electric controlledIJ If not you will have to run a hose from your variable speed header drive which you unplug after slowing down , to the the reel speed on the header. IF you do not have variable speed header drive you have to get valve section to stick in. As to header height if the combine has a 3 position ahhc it will have a 6 pin connector. Plug your old head harness one pin at a time to the combine like this, red on combine to lower wire on head, blue combine to raise from header, and the power wire - med , wh-green to the center power wire of the switches. Then turn on ahhc, and combine and header clutches and have in mid position on the dial and press lower switch to activate system.