Combines lateral tilt and Fieldstar

We have the fieldstar and the smarttrac on our new R62, i have gotten it dialed in pretty good as far as the yield goes and the moisture is very close, it is within less than 1_2 of a percent and works quite well. The only thing i would have liked to have seen is numbers up there on the screen instead of the bar graphs, only my thoughts. The smartrac has worked well but the lateral tilt is acting up at times, seems to push harder on the one side, other than that we are very happy with the machine and its performance so far, it is real hungry for corn, 8 row narrow in 150 bushel dry corn at 5 mph and don't feel it working hard at all.

Agco is coming with numbers on the screen.

Have you recailabrated the lateral tilt using the hidden key on the control box in the cab.Mine works perfect. Reading the book it sounds harder than it is to do. Tim

That is something i didn't know about at all, we have only had the machine for under 3 weeks and haven't had the time to do a lot of looking at things yet, the combine and heads were very late in getting here and we went right to the field and now is the first rain we have had so i have had some time to look things over a lot better. Please tell me more about this and what to look for and do. Thanks and hope i can try to fine tune this.

Can this lateral tilt be put on an R50 with a 320 headIJIJIJIJ If so I need more info...

uh, technically anything is po$$ible. One would have to have an R52 late throat. A new auto header height control $y$tem, $eriou$ hour$ of labor and $ome big buck$ $$$$$$

YOU DIDN'T HAVE TIME TO lOOK HER OVERIJIJIJIJIJ!!!! Man, every new Gleaner comes with a super model in the Grain bin clad in a scant itsy bitsy silver metalic painted on bikini!!! She is available for photo ops all day and dinner in the evening and......Going straight to the field you probably hacked her off real good and she hopped out of the dust and left I am sure...... What a missed opportunity....

You must be joking, i sure did find the super model with the scant itsy bitsy silver metalic painted on bikini, this is the reason we didn't have time to go over any thing else, me miss something like this, NEVER. Seriously though thanks for the information i will have a little bit more time to look things over now as the rains have come and stopped harvest for a day or two.