Combines lateral tilt on r52

[big_orange]

If I'm reading correctly all you're doing is calibrating the auto header.The lateral tilt is calibrated by raising the header clear up,with clutches and switches off,tilt to the left and press hidden C while holding the tilt switch till the light flashes,right is the same while pressing the l and tilting right.

 

[St]

big orange. we have done that calibration to.It is the auto header one that is acting up.WE can only get 2 flashes in a row while holding C.With it on the ground holding l we get 3 flashes.

 

[big_orange]

Does a R-52 have the sensor under the cab for the feeder house raise and lowerIJIt's on the right hand side of the feeder house,maybe that sensor could be bad.

 

[silverbill]

Had the same problem with a 800 series on a R55. Finally replaced one of the potentiometer switches on the head. Could'nt get the needed 2.0 volts difference between up and down. Been troublefree since then.