Combines lateral tilt on r52

If I'm reading correctly all you're doing is calibrating the auto header.The lateral tilt is calibrated by raising the header clear up,with clutches and switches off,tilt to the left and press hidden C while holding the tilt switch till the light flashes,right is the same while pressing the l and tilting right.

big orange. we have done that calibration to.It is the auto header one that is acting up.WE can only get 2 flashes in a row while holding C.With it on the ground holding l we get 3 flashes.

Does a R-52 have the sensor under the cab for the feeder house raise and lowerIJIt's on the right hand side of the feeder house,maybe that sensor could be bad.

Had the same problem with a 800 series on a R55. Finally replaced one of the potentiometer switches on the head. Could'nt get the needed 2.0 volts difference between up and down. Been troublefree since then.